Author: DENNIS GORSKI

Posted on by

Reloading Supplies vs Factory Ammo

Reloading Supplies

Many people take up reloading because of the financial incentive. But with experience and by experimenting with different reloading supplies, you’ll soon come to appreciate the improved accuracy compared to factory rounds.

The basic fact is that no two guns are the same. Manufacturers develop round specifications to “best fit” as many different guns as possible. Hand loading not only allows you to fine-tune rounds to your make and model, but with practice you’ll fine-tune your rounds to match both your individual gun and the specific type of shooting that you’ll be doing with those rounds.

Why Hand loading Is More Accurate

It can’t be denied that it takes time to perfect rounds for your gun. But with a little coaching from guys that came before you, the amount of time will be greatly reduced. In a nutshell, what you want to accomplish is matching the best powder, primer, case, and bullet for your gun along with a careful and consistent process to load each round. It’s all about your choice of reloading supplies and process.

None of that happens with factory ammo. Each gun manufacture has different tolerances for the gun barrel and chamber. Some chambers are tighter than others and the free bore varies. Factory ammo is made to fit the tightest chamber and the shortest free bore. If they didn’t, their rounds will fail to chamber in some rifles. Factory ammo is not designed or made to shoot well from your specific rifle.

Precision Makes Perfect

Once you nail down the reloading supplies and process that you use, there are more advanced steps that you can take to further improve your results with hand loading. Some of these will further improve your performance or some might not fit your individual needs. As you progress from novice, to intermediate, to expert, you’ll find more precision techniques to improve your rounds.

  • Determine the free bore of your rifle so that you can seat bullets with a consistent COL (cartridge overall length) within 0.02” of the rifling (some people allow .010” to .040″ jump to the lands). Minimizing bullet jump improves accuracy.
  • After firing a round in your rifle, the case forms to match your chamber. That neck sizing improves your accuracy. However, after several firings, you will need to resize the full length to move the shoulder back slightly.
  • Another advanced technique is separating rounds based on the case and bullet weights. The advantage over factory ammo is that allowable factory tolerances can be two or three grains above or below the stated weight.
  • Other advanced techniques include neck-turning (making the thickness of the neck even all-round), a uniform/consistent primer pocket, and a uniform flash-hole.

For the Best Results, Measure Consistently

You might be surprised how frequently factory loadings change from lot to lot. This is a big advantage with hand loading when the process is to carefully measure everything. Using the same reloading supplies and process, you are able to achieve the same results time and time again even after hundreds or thousands of rounds.

The more you track the performance of your reloading supplies and fine-tune your process, the more impressed you’ll be with the results. If you’re still not positive that hand loading is more accurate do a simple test. Fire a series of five-shot groups with both factory and hand loaded ammo to see which is more accurate. If you have it right, you should find that the hand loaded ammo produces smaller groups. Results will vary but by using the right reloading supplies it’s common for hand loads to have an average group size around 0.6 MOA. Run of the mill factory ammo will likely produce> 2 MOA groups.

Titan Reloading is a Master Distributor of Reloading Supplies & Equipment online. Choose from Lee Precision, Dillon, Hornady, Redding, Mec, & Lyman. For more information and to shop our online store please visit www.TitanReloading.com or contact Titan Reloading at 262.397.8819 with any questions.

Posted on by

Keep It Simple With Basic Equipment and Reloading Supplies During These Trying Times

Reloading Supplies

Having reloading supplies on hand assures that you can enjoy your favorite indoor hobby whenever you want. Sitting down at your workbench for some solitude and being productive is very rewarding whether it’s because of the weather, COVID-19, recharging your batteries, or some other reason.

Doing your own ammo reloading does a lot for your peace of mind in these trying times. Once you have the basic equipment and as your finances allow, you can stock up on reloading supplies like powder, primers, bullets, and brass. From stormy days to COVID concerns, you’ll be prepared with a productive and useful indoor hobby.

The DIY in you will also appreciate the mechanical aspects of the hobby. Not only does it involve presses, gauges, close measurements, and other tools, once you get started, you’ll soon be fine-tuning your loads to improve your results over those store bought rounds that are more expensive and harder to find. You do have to make an initial investment in the basics but it’s almost certainly more cost effective than you think.

Safety First

The following safety tips go a long way to help you achieve success; especially if it is your first time reloading. Of primary importance is proper handling and storage of reloading supplies (especially primers and powder). The other important aspect is always following the instructions from a trustworthy handbook and by the manufacturers of the equipment as well as the reloading components. Don’t hesitate to ask if you don’t understand everything. These safety tips are not all-inclusive but are the place to begin.

  • Before sitting down at your workbench, give it a visual inspection for potential hazards. A tidy workspace is a safe workspace.
  • Commit your undivided attention to the task at hand. Having a well-thought-out routine that you follow avoids mistakes. Reloading is a leisurely hobby – slowing down avoids mistakes. No alcohol or drugs.
  • Limit the powder at hand to what is needed right now. No smoking around powder and keep your extra supply stored safely away from your immediate work area.
  • Don’t store primers in bulk! Bulk primers are very likely to mass detonate with the explosive power of a hand grenade.
  • Don’t take an unnecessary risk by reloading without safety glasses.
  • When loading powder, check your caliber and measure twice. Make it a habit to visually check the powder level to be sure that you have not doubledthe powder charge.
  • Measure your seated rounds with a caliper, if you can’t chamber it, don’t shoot it.
  • Store your reloads in a cool, dry place.
  • Cleanup your workbench when finished (especially powder and primers). Your ammo reloading bench is not the place for old car parts nor a temporary place for other items.

Be safe and enjoy! Having ample reloading material on hand will have you ready to head outdoors whenever the time and desire to go shooting is right. You’ll also walk away from your workbench with the satisfaction of a job well done.

Titan Reloading has most items in stock and is receiving new shipments daily and weekly. We fill orders in the order they are placed.

Titan Reloading is a Master Distributor of Reloading Supplies & Equipment online. Choose from Lee Precision, Dillon, Hornady, Redding, Mec, & Lyman. For more information and/or to shop our online store please visit www.TitanReloading.com or contact Titan Reloading the Master Distributor of Lee Precision reloading equipment & supplies at 262.397.8819

Posted on by

Gun Enthusiasts Guide to Reloading Supplies

Reloading supplies

It takes practice and repetition to fully appreciate the benefits of the ammunition reloading process. Once you have all of the equipment and supplies you need and get the hang of it, you will begin to see the benefits and features that shooting enthusiasts have enjoyed for years, including:

  • Significant savings over buying new bullets
  • Customize bullet options
  • Ability to recreate ammunition types that are rare, obsolete or otherwise unavailable

Reloading ammunition does take a basic list of equipment and supplies you will need to invest for your hobby. The following are the most important materials and gear to get started.

Reloading Press

The reloading press is the foundation of the ammunition reloading process. There are three types of reloading presses available based on your level of experience, the volume of your reloading activities, and your budget.

  • Single stage

    The most basic and most affordable type of reloading press, single stage presses combine the decapping and resizing operations. A mechanical arm is used to push cases and the case holder into reloading dies. A single stage reloading press is most often used by gun hobbyists with little to no prior reloading experience.

  • Turret.

    A turret reloading press allows you to load hundreds of rounds per our with multiple dies mounted on the press. A powder measure can be mounted to for using multiple dies. This is the next logical step for those gun enthusiasts who are looking to save time and reload bigger volumes of ammunition than a single stage press.

  • Progressive. 

    These are more advanced reloading presses that will require additional knowledge and set up to run safely and efficiently. Multiple die stations allow progressive presses to produce up to 500 rounds of ammunition an hour. Recommended only for the most experienced reloading veterans.

Reloading Dies

A variety of dies are available for pistols and rifles. Reloading dies are essential for the precision of the ammunition reloading process. Different types of dies are used to enhance various qualities of the shoot, such as precision, volume, and versatility, so it is important to get the proper reloading die for your specific use and applications.

Calipers

Calipers are used to accurately measure to match individual specifications and to adjust the reloading die to the length of the bullet to you need. Calipers come in sized, quality and cost, including some that come with digital displays to make the process more precise and accurate.

Powder scale

Powder scales are also available in a wide range of styles, prices, and features. Electric reloading powder scales increase efficiency and speed, while balance scales are more suited for those with limited reloading experience, as they are easier to calibrate.

Reloading manuals

Whenever you are reloading ammunition, a reloading manual should always be nearby. These manuals provide valuable information relating to the amount of ingredients needed for the reloading process. The reloading manual lists bullet and powder types, and the charge amounts required for each kind of configuration.

Reloading starter kits

For those gun enthusiasts that are just getting started in ammunition reloading a starter kit comes with all of the reloading supplies you will need. As you gain experience, confidence, and momentum, components can be upgraded to speed up the process and increase the volume per hour.

Titan Reloading is a Master Distributor of Reloading Supplies & Equipment online. Choose from Lee Precision, Dillon, Hornady, Redding, Mec, & Lyman. For further information and/or to shop our online store please visit www.TitanReloading.com or contact Titan Reloading the Master Distributor of Lee Precision reloading equipment & supplies at 262.397.8819 with any questions.

Posted on by

Reloading Supplies vs. Factory Ammo

Reloading supplies

Some are into reloading for better accuracy, distance, or the wallop to get the job done the first time. For some, it’s because they have trouble finding the correct caliber ammunition for their preferred gun. But the common ground that ammo reloading brings to almost everyone is the pure and simple freedom from the faddish whims of ammo manufacturers.

Seasoned shooters go with ammunition that he/she has personally tested. Seldom are those, the latest manufacturer designed rounds,that are intended to appeal to the widest swath of shooters possible. We’ve all experienced ammo shortages that result when a manufacturer slashes production of a less popular round (even though tried and tested) in favor of a new round that is currently flying off the shelf. Even if you aren’t always interested in saving time and money by loading your own ammo, it’s a wise decision to always have a supply of your favorite reloading supplies on hand – just in case. Unless you only use basic ammo, finding your preferred factory ammo can be both tough and expensive if you don’t reload.

What is Your Time Worth?

When you enjoy getting away by yourself for an hour, with a progressive press it’s not difficult to crank out 500-600 rounds in about an hour. Better yet, with good quality reloading supplies and the machine set up right, you get both consistent and superior results.

But time isn’t the only thing that you want to consider. Due to the current global Pandemic(COVID-19), we’re all experiencing a new level of anxiety and frustration. We don’t know which stores will be open next week and which ones will be told to close. Maybe we’ll go back into lockdown soon or maybe not. Times are certainly uncertain. What will be the next disruption in the supply chain? Will it be factory ammo? We need to have essential supplies stored to cover a lot of “what ifs.” That should include ammo reloading supplies and equipment even if we don’t always have the time to do our own reloading.

Of course,many other variables also go into our favorite pastime…

Custom Reloading Supplies Meet Your Variables

If you’re just a short-range target shooter, factory ammo will probably get the job done most of the time. Even up to 100 yards. You may have found the right factory ammo that matches your preferred rifle to reach 300 – 400 yards. But that’s pushing it and probably the limit.

Once you get beyond a few hundred yards, factory ammo isn’t going to cut it. If you’re going to be reaching way out there, then the speed variance in a factory load will become a big problem. Good speed consistency from factory ammo is an exception and not the rule. Be honest with yourself, can you sustain a sub-minute of angle with factory ammo? Can you place a group of 5 in 2 inches at 300 yards? When unsuccessful, it’s mainly due to having a bad box of ammo. The one variable easiest to take out of the equation is having custom rounds that you know are consistent. Only you can consistently fine-tune the variables to patiently stretch sub MOA groupings out even further to have seven or eight-inch groupings at 800 or 1,200 yards. Anyone serious about their rifle setup strives to have their gun shoot a sub MOA group at almost any distance.

Not even the high-cost factory rounds are 100% consistent. The further you shoot, the more you’ll notice the inconsistency. It’s okay shooting one-inch groups at a hundred yards but that turns into ten-inch groupings at 1,000 yards. Your tenacity with handloads is the way you’ll improve your groups.

Not many of us like uncertainty in our lives. By carefully choosing your reloading supplies, you get a lot more bang for your buck. You get personalized rounds for a lower cost without having to rely on a big box store to have subpar rounds on the shelf when you need them. You can’t put a price on freedom but it doesn’t have to cost much either.

Titan Reloading is a Master Distributor of Reloading Supplies & Equipment online. Choose from Lee Precision, Dillon, Hornady, Redding, Mec, & Lyman. For further information and/orto shop our online store please visit www.TitanReloading.com or contact Titan Reloading the Master Distributor of Lee Precision reloading equipment & supplies at 262.397.8819 with any questions.

Posted on by

Essentials One Needs to Get Started with Reloading

Reloading supplies

Whether you are a novice shooting enthusiast or a veteran with years of experience, reloading your own ammunition can save you significant amounts of money and turn into a fun hobby in the process. Using the proper supplies and equipment makes reloading ammunition a safe and efficient process.

If you are just starting out reloading your own ammunition there are some initial costs associated with getting all the reloading supplies and materials you need to get you going, but you will start seeing the savings, there is no turning back.

As you get more advanced and branch out, there are options to make the process more efficient for larger amounts of ammunition.

Reloading Press

The reloading press is the foundation of ammunition reloading. The press holds the dies you use to process the ammunition and is available in a wide range of shapes and sizes. The purposes of the reloading press:

  • Presses brass casings against the decamping pin forcing out the old primer
  • Forces casings into resizing die
  • Returns brass to its original shape and size
  • Inserts new primer into primer pocket that was just emptied
  • Opens the mouth of the casing so a new bullet can be inserted
  • Presses the new bullet into the casing
  • Crimps bullet casings to complete the shaping of the bullet

There are three main types reloading presses available on the market today – single stage press, turret press, and progressive press. Each has its own benefits, features, and restrictions.

Single Stage Press

A single stage press is the most basic used for those just starting to reload ammunition. It provides the easiest, safest, and most affordable option for shooters with zero or limited experience reloading. You will be able to learn the process and start reloading ammunition without having to make too many adjustments or calibrations.

Turret Press

The next step up for enthusiasts with a little more experience is the turret press, which can hold multiple dies and allows you to load hundreds of rounds an hour. Turret presses can reload much larger batches than a single stage press and will save you even more money and time once you are ready to take the next step.

Progressive Press

The most advanced press is the progressive press that only the most experienced reloaders and active enthusiasts should attempt. These presses are designed for shooters who go through large amounts of ammunition on a regular basis. They are far more complicated than the single stage and turret presses, requiring more time and experience to set them up and use them safely and efficiently. They come with multiple die stations, powder measures, and several specialty dies. The highest priced reloading presses on the market, progressive presses are designed to reload batches of ammunition at a high rate.

Reloading Manual

The reloading process cannot be properly completed with referring to the press’ reloading manual to guide you through. Your reloading manual is used as an essential reference every time you are developing a load. It is filled with valuable information and tips to help make the process go smoothly and safely.

Reloading Dies

Reloading dies are used in in the decapping, sizing, seating, and crimping applications in the process. Dies are designed for specific needs and types of gun being used. Reloading dies can be used when you are shooting for quantity, versatility, or precision.

Each caliber you are reloading requires its own set of dies and shell holders. There are three main categories of reloading dies:

  • Expanding die
  • Seating and crimping die
  • Sizing, decamping die

Additional Reloading Supplies

The following are some more supplies and accessories that help in the reloading ammunition process:

  • Calipers
  • Case Cleaner
  • Powder Dispenser
  • Powder Scale
  • Reloading starter kits
  • Workbench

Get Started with Titan Reloading Today

If you are just starting out reloading ammunition, looking to upgrade your system, or need to restock you supplies, the industry experts at Titan Reloading have everything you need. Contact Titan Reloading today for complete information or browse our expansive online catalog www.TitanReloading.com to find the equipment and materials you need. For further information or any questions please contact us here.

Posted on by

Reloading for Beginners

Reloading supplies

Ammunition reloading is used by beginners and veteran shooting enthusiasts alike to save money and take up an enjoyable and fulfilling hobby. The process is safe and efficient with the proper reloading supplies.

Reloading Manual

The reloading manual is the most essential item you will need for the reloading process. Used as a valuable reference source each time you develop a load, the manual also contains reloading information, as well as helpful tips to make the process smoother and more efficient.

A reloading press is an essential component of the reloading process that is used to:

  • Press brass casings against a decapping pin that forces out old primer
  • Forces casings into resizing die to return the brass to its original shape and size
  • Insert a new primer into an empty primer pocket
  • Opens the mouth of the casing to insert a new bullet
  • Press the new bullet into the casing
  • Crimp bullet casings

Reloading presses are available in three main types depending on the kind of reloading application you need.

Single Stage Press

Ideal for beginners and those with limited experience, a single-stage press is the most cost effective and easiest way to begin reloading your own ammunition. More costly and complicated presses can produce higher volumes quicker and easier, however working with the single stage press will teach you the basics of the process, from which allow you to build on your skills accordingly.

Turret Press

A turret press can hold multiple dies at one time allowing you to quickly index from one die to another, with some models offering an automated index function. Turret presses are often used as starter presses for rifle and pistol reloaders. They are also used as a precision rig by experienced loaders.

Progressive Press

A progressive press is used by experienced, active shooting enthusiasts who regularly go through a high volume of ammunition. Single stage reloaders do not suffice when processing hundreds of cartridges. These more complicated machines need more time, effort, and maintenance to set up and use safely and smoothly. Progressive presses feature multiple die stations designed to hold all dies needed for your reloading application, as well as powder measures and specialty dies. Progressive presses are the most expensive type of press created tocrank out large batches of ammunition.

Reloading Dies

Reloading dies screw into reloading presses as the press pushes the case into a die. A set of dies and shell holders is needed for each caliber you need to reload. The three main types of reloading dies include:

  • Sizing, decapping die
  • Expanding die
  • Seating and crimping die

Reloading Starter Kits

Shooter enthusiasts just getting started in the process of reloading ammunition often begin with a reloading starter kit that includes a complete set of components at a discount over purchasing each piece separately.  Even as you advance onto more advanced machinery and processes, you will still be able to make use of the single stage press and other reloading supplies that come in reloading starter kits.

More Reloading Supplies

Additional reloading supplies and accessories needed to reload your own ammunition include:

  • Powder Dispenser
  • Powder Scale
  • Calipers
  • Workbench
  • Case Cleaner

Contact Titan Reloading Today, The Premier Reloading Supplier

For further information or questions about ammunition reloading process, contact the industry professionals at Titan Reloading at 262.397.8819 or browse our expansive online catalog to find exactly what you need to get started www.TitanReloading.com.

Posted on by

Lee Swage Tool Removes Crimps from Primer Pocket

Lee swage tool kit

The Lee swage tool kit available from the ammunition reloading professionals at Titan Reloading is used to remove the military crimp from the primer pocket while swaging the primer pocket the brass in an automatic processing press. The swage tool is designed and manufactured to leave a smooth entry radius for new primer.

All parts and components are made from high quality materials and designed specifically for use in the Lee Automatic Processing Press (APP). The APP quickly and easily prepares cases and size cast bullets, as well as an efficient and convenient single station reloading press.

Lee’s Swage Tool Kit for Automatic Process Press

The APP is a valuable piece of machinery for shooting pros and enthusiasts who enjoy the savings and self-satisfaction of making their own ammunition. The ability to easily primer pocket swage is just one of the many highlights and features of this versatile press. Being able to mount die to both the top and the bottom of the press is a revolutionary design that opens up its uses to additional applications such as:

  • Bulge bust
  • Deprime
  • Primer pocket swage
  • Size cast bullets

Lee Swage Tool Offers Convenience, Versatility

Now you can swage primer pockets just as fast as you can operate the press lever. The swage tool allows you to quickly remove crimps on the case primer pockets without having to cut them, saving time on cleaning up leftover trimmings and other debris.

The Lee APP Primer Pocket Swage Kit includes:

  • 22 & 30 caliper decap and flare die
  • Swage push die
  • Swage holder
  • 22 cal. and 30 caliper push rod
  • Small swage punch and large punch
  • Shell holder adapter

The process of primer pocket swaging is a quick and effective method for all range brass. Lee’s swage took kit is ideal for priming issues and is widely used for surplus military and law enforcement brass as an affordable source for large volumes of cases.

Cases that most frequently see primer pocket crimps include:

  • 45 ACP
  • 223 (5.56mm)
  • 30-06
  • 308 (7.62×51)
  • 9mm Luger
  • Special law enforcement 40 S&W

A hardened steel swage punch is extracted automatically from the primer pocket by five powerful 400-pound force disc springs. Breech lock die body quickly installs with no additional adjustment required.  An X-PRESS shell holder that is sold separately will help to speed cases through the swaging process.

Contact Titan Reloading Today

Whether you are veteran shooter with years of experience reloading or a beginner looking to save some money on your new hobby and get invested in the process, Titan Reloading is a one-stop shop for all materials and equipment needed for reloading supplies. A comprehensive online catalog includes the Lee Swage tool kit and everything else you need to get started or restock supplies.

For further information or to peruse and shop from our online store please visit www.TitanReloading.com or contact Titan Reloading with any questions about any of our products at 262.397.8819.

Posted on by

Lee Pro 4000 Press

Lee Pro 4000 Press

The Lee 4000 Press available at the industry professionals at Titan Reloading is ideal for avid shooters to save money by making their own ammunition. For competitive shooters and hunters the biggest ongoing expense is buying and rebuying ammunition. The Pro 4000 Press provides an easy and safe method to make your own.

Benefits and Features of the Pro 4000 Press from Lee 

The Lee Pro 4000 Press  is the most affordable and easiest to operate four-station progressive press on the market today. The Pro 4000 from Lee Precision has all of the incredible benefits and features of the Pro 1000 with a fourth station added to allow for factory crimping and post sizing.

Press priming is quick and dependable, making this press ideal for loading mixed range or well used brass. It is also ideal for basic case preparation processes such as depriming before a tumble cleaning session. You can deactivate the auto index function and the press acts as a handy and reliable single station press.

Among the features and benefits of the Lee Pro 4000 Press include:

  • Easy carriage changeover in just seconds, including primer size with no additional adjustments having to be made.
  • Attached bin and bracket to catch completed rounds.
  • Automatic case advancement setting up to 2 5/16”, with longer cartridges loaded and advanced manually.
  • Automatic universal case feeder.
  • Color coded spline drive, quick change breech lock bushings.
  • Easy to use process for installing and adjusting various dies.
  • Ergonomic wood grip roller handle.
  • Exclusive auto case placer.
  • Four breech lock bushings.
  • Hex wrench for shell plate change and storage rack for tools, a $30 savings compared to other brands.
  • Large and small sized safety prime and priming arms, allowing for safer dispensing of primers of all sizes and brands.
  • Unique design features allow as much or as little automated control as desired with no adjustments to be made.

Among the most common reasons shooting enthusiast use presses to reload ammunition include: 

  • Customize Bullets
  • Recreate Obsolete or Unavailable Ammunition Types
  • Rare Bullet Types
  • Cost Effective

Whenever operating the Lee 4000 Pro Press or any other reloading equipment, it is always essential to practice strict safety procedures and adherence to the press manual.

An impressive team of industry specialists at Titan Reloading is dedicated to providing novice and veteran shooting enthusiasts top quality reloading supplies  to produce ammunition at a fraction of the cost of purchasing complete ammunition.

For further information or questions please contact Titan Reloading today at 262.397.8819 or visit www.TitanReloading.com to peruse and shop from our extensive inventory.

Posted on by

MEC Reloaders Troubleshooting Tips

MEC reloaders

The Mayville Engineering Company (MEC) has been designing, producing, and servicing shotgun shell MEC reloaders that generations of shooting enthusiasts have trusted since 1955. MEC reloaders are proudly made in the USA and available atTitan Reloading, a trusted supplier of premium quality reloading supplies[ and equipment.

Reloading ammunition with MEC reloaders is a relatively simple process, though it does involve moving parts on intricate machinery and specific instructions for exact measurements and mixtures. Even the most experienced and avid gun hobbyist can run into problems while operating MEC reloaders.

The following are some helpful tips if you run into trouble while reloading your ammunition

MEC Reloaders Downstroke Issues

If your reloader is jammed or bottoms out halfway down the downstroke, it is most likely due to the drying out of the resizing collet. Apply anti-seize lubricant on the outer areas of the collet fingers. The issue may also be caused by a buildup of shot or powder inside the collet. The wad guide on the progressive reloaders may also be set too low.

Bushing Droppings Varying from Chart Amounts[ 

The bushing chart supplies recommended bushing information, through charges can vary. An accurate, reliable scale is highly recommended to ensure accuracy and safety. Always make sure that the charge bar moves completely to each side with every motion.

Powder Leakage

A missing or damage grommet can cause powder to leak out of the top of the bar. Improperly installed or missing brass washers can also lead to powder leakage. Inspect and replace grommets and washers regularly to ensure a proper seal.

Changing Reloading Lead to Steel Shot

The process of reloading steel shot requires the installation of a steel shot kit and charge bar. When the kit is installed, only the charge bars need to be swapped out to go back and forth to lead shot applications.

Prominent Features of MEC Reloaders 

Among the design features that come with MEC reloaders include:

  • Flip-top measuring allows for the powder and shot containers to be easily inserted and removed without spilling.
  • Pro-check feature prevents spills by keeping the charge bar in proper sequence.
  • Charge bar provides quick changes to the powder charges.
  • Automatic primer feed comes standard on some models and is available as an accessory on those that do not.
  • Zytel rust-resistant crimp dies resist the building up of residue without the risk of corroding.
  • Cam-operated crimp assures a perfect crimp each load.
  • Adjustable rammer tube applies pressure to the wad column and can be adjust manually.

Power ring collet resizer squeezes the base back to its original dimensions and releases the shell.

Contact Titan Reloading for MEC Reloaders 

Titan Reloading is an industry leader in supplying premium quality, affordable ammunition reloading products, equipment, and accessories. An impressive team of reloading experts provides exceptional customer service and the industry knowledge to provide cost-efficient solutions to your reloading needs. Whether you are new to reloading or a veteran enthusiast, Titan Reloading is a one-stop source for reloading supplies.

For questions about MEC reloaders  and the rest of our comprehensive inventory options, contact Titan Reloading at 262.397.8819  or for further information please visit www.TitanReloading.com.

Posted on by

What Reloaders Need to Know About the Lee Classic Cast Turret Press Kit

Turret Press Kit bullet reloading

The Lee Classic Cast Turret Press Kit is the machine that does it all! The purpose of a turret press is for you to reload cartridges quickly and efficiently. When you place a single stage press, a turret press, and a progressive press side-by-side, you see that the turret is a hybrid between the single stage and the progressive. The Turret Press Kit is ideal for the reloader wanting speed and quality at an affordable price.

Speed and Versatility 

The Turret Press Kit (product # 90304) is capable of reloading any center-fire cartridge ranging from small critter calibers to large magnum cartridges. Your reloading speed increases dramatically over a single stage (that requires changing out dies between stages). The Lee Classic Cast Turret Press Kit holds up to four dies from which you can complete rounds without the time consuming need to change dies. You simply rotate the turret to advance to the next stage.

The common station set up uses 4 dies: 1. resizing/decapping, 2. case mouth expansion/powder charging, 3. bullet seating, and 4. factory taper crimp. With each handle pull, the die plate rotates to the next station without needing to screw in a different die. Your speed also increases via the powder dropping from a mounted powder measure through a hollow case mouth expansion die. Your ammo production greatly increases over that of a single stage press.

Quality and Durability

An ammo reloading press is a tool. A quality tools should withstand wear and tear especially through reloading. The Lee Classic Cast Turret Press is a premium quality tool made from heavy-duty materials. The cast iron, steel, and hardwood finish on the lever are strong, durable materials intended to endure use for many years to come and thousands of ammo rounds. The sturdy steel joints won’t break and the clearance area is designed to work with different types of rifle cases.

You won’t find a more versatile, solidly built turret press for a price this low any where. Some progressive presses may have some added functionality but most of the parts are sold separately.

The Turret Press Kit is a valuable tool that belongs on any ammo reloading work bench. Why pay more for anything less?

For further information and/or questions about our Lee turret press kit or any other product please contact Titan Reloading at 262.397.8819 or to peruse and shop our online store please visit www.TitanReloading.com – the Master Distributor of Lee Precision reloading equipment & supplies at.